OUTER FABRIC COMPOSITION: 53% PU 47% PA
LINING COMPOSITION: 100% PE

COMPONENTS
Front zipper: 1 double slider zip
Leg pleat zipper: 2 coil zips
Hood fastner: 1.5 plastic snaps
Front fastners: 4 serviceable plastic snaps, 1 decorative fastner
Pocket fastners: 3 plastic snaps
Cuff bands: 10 mm wide white elastic band
Hood drawstring: cotton cord
Waist band: 20 mm wide white elastic band
Waist lining elastic band: 10 mm wide white elastic band

STANDARDS
This garment complies with the requirement of REGULATION (EU) 2016/425, EN-ISO 13688:2013, EN 343:2019, and UNE-EN14058:2004 for this PPE.

This PPE corresponds to a one-piece quilted weatherproof garment that fully covers the body down to the wrists and ankles.

The yoke and sleeves consist of one piece. It fastens down the front from the neckline down to the rise by means of a double slider zipper. The sleeves have windbreaker elastic cuffs. The zipper is protected by 45 mm double storm flaps that fasten with 5 snaps.
At waist height the interior houses a 20 mm elastic band for a closer fit.

At a height of 30 cm, at the bottom exterior side of each leg, there is a zippered opening with a pleat that goes down to the bottom and fastens by means of a zipper, to facilitate putting the garment on.

The neckline is attached to a roll-away hood that adjusts with an elastic band.

The bottom front has two reach-through pockets with storm flaps that fasten with snaps. In addition, the top of the left front panel includes a patch pocket with flap and snap fastenings. The entire garment is fully quilted.