Jacket
PLF717
OUTER COATING: 53% PU 47% PA
LINING COMPOSITION: 100 % PE
COMPONENTS
Front zipper: 1 cremallera separador
Collar fastners: 3 plastic snaps
Front fastners: 5 plastic snaps
Elastic on hood: 10 mm wide white elastic band
Velcro on pocket lining: 25 mm wide velcro strip
Reflective bands: 3M Scotchlite
Elasticated trim on cuffs and waist band
STANDARDS
This garment complies with the requirement of REGULATION (EU) 2016/425, EN-ISO 13688:2013, EN 343:2019, EN ISO 20471:2013+A1:2016 and UNE-EN14058:2004 for this PPE.
This PPE corresponds to a hip-length anorak. The yoke and sleeves consist of a single piece. The sleeves have interior windbreaker elastic cuffs. The high collar houses a roll-away hood (with elasticated front edge) that tucks into the back and fastens with three snaps.
The back is straight cut and is equipped with two reach-through pockets on the front with storm flaps that aesthetically define the waist on the front.
The front fastens with a zipper and 6 mm wide placket that fastens with five snaps.
As per standard UNE EN ISO 20471:2013, this garment is equipped with two thermo-fixed 3M Scotchlite Bright Silver reflective bands around the torso and sleeves.
Colours | Navy blue / Yellow fluorine |
---|---|
Sizes | S, M, L, XL, XXL |
Standards | EN 14058:2017, EN 343:2019, EN ISO 13688:2013, EN ISO 20471:2013+A1:2016, REGULATION (EU) 2016/425 |